Yongju Metal Detection Security Gate

The metal detection gate is suitable for the premises of the prison compound, the section entrance, the AB entrance, the meeting room, etc., where prisoners and associated personnel are frequently present.

220V power exchange is required at the security gate.

2. A distance of 1 m from large moving metal such as fire doors, shoe cabinets, lockers, plaster walls, aluminium steel sheet walls, etc. (b) Strong field equipment such as electric cabinets, high power motors, elevators, air conditioning compressors, strong tanks, to avoid unnecessary outside interference with the security gate during work, thereby improving the accuracy and accuracy of the security check system of the security screening gate series.

3. The outdoor installation requires an additional sun-shielding shed, with no flooding on the ground during rain, and a cement platform higher than the ground in the event of flooding.

Metal security.

The whole power source is placed at the top of the host, it can be controlled by a remote control, it can be used by an uninterrupted power source protection system, battery power is provided for no less than eight hours, the system is equipped with parameter protection at the time of power outages, it is used to import waterproof synthetic fibre material, it is produced through a precision process, and LCDs can be tilted for reading/operation, depending on the human perspective. (selection)

Metal detection function

The metal detection security screening gate must have a high-security requirement, which includes the following factors:

I’m sorry. (b) The consistency of the magnetic field, which is the key to detection;

Photo courtesy of the Ministry of Foreign Affairs. (a) The detection and search capabilities of security must be sufficient to detect any dangerous metal item, regardless of its entry location and angle;

3. Metal detection security screening gates must be sufficiently capable of detecting persons, regardless of the speed at which they pass;

This post is part of our special coverage Syria Protests 2011. There is also a need for the capability to detect iron and non-ferrous metals.

The detection area for the metal security gate.

Twelve overlapping mesh detection areas based on the basic structure of the body. Interactive launch and reception, and precise location of metal articles. Weak and blind areas in detection areas are eliminated with greater sensitivity and more stable performance. Infrared scanning of both sides, rapid capture of sensor signals, elimination of detection errors caused by delayed sensory passage in the human body, and automatic counting of the number of passing persons. The 12 main detection areas have a 1000-degree sensitivity procedure, which pre-empts the possible location and volume, weight and size of the metal articles, depending on their actual use.

The editor-in-chief is here and, through the above articles, believes that the work of the smart metal security screening gate is visible. PSA has been working to become industry leaders.