Cell phone detection, off-site detection.

The mobile phone detection system, which detects cellular phones, notebooks and digital cameras, is capable of detecting the detection equipment for mobile phones, notebooks and digital cameras, and detects the security detection system for electronic products such as mobile phones, switch-off, removal of batteries, removal of SIM cards, etc., in any condition.

The general metal detector can only detect the metal-bearing mobile phone, and some mobile phone detectors can detect the mobile phone in the open state, whereas the electronic product detection system in this paragraph is different from the one that detects the mobile phone in the open, off, stand-off, removal of batteries, removal of SIM cards, etc., when the person being tested passes through the door. And this paragraph does not alert the metal products, minus unnecessary work intensity of the security officers, while passive detection of the product produces no radiation and no harm to the human body.

A new generation of fast mobile phone detection of the main point of the door, which is fast enough to allow the detection to be conducted in all parts of the body, making the detection more accurate, with a 99% detection rate; Passing by less than one second.

In addition to the portal itself LCD display screen, the product is placed at a remote pc management end, allowing for remote management monitoring and data networking. Reduced intensity of security staff.

The system addresses the current industry ‘ s safety management of classified electronic information carriers and the need for control of the free access of the classified electronic information carriers to higher-level locations or departments. Equipment is light and robust in a wide range of industries, including education.

Detection characteristics

The detection portal uses passive detection techniques and does not send any detection radiation sources to the person being tested, without any harm. The product in this paragraph does not change the original characteristics of the item being tested and there is no change in the pre-test and post-test. The same is true for articles that are placed in metal packages (e.g. tin paper, copper tatters, etc.), and are not affected by packages.