Airport security screening gate metal detector

Reliable exchange of information

The exchange of information reflects an interaction between the functional components of the system or the functional subsystems of the applications. The information exchange module provides a matrix for the exchange of information, and it is not necessary to compel the sender to know some of the information of the addressees, nor to compel the addressees to know some of the information of the senders, and the senders and recipients need only know the format of the information and the destination to be reached, so that they can interact with each other.

The information exchange module consists mainly of a news route, management and information exchange engine, and provides message security authentication and connection heartbeat management to ensure the legitimacy and stability of external system access to the news bus.

Metal security.

The whole power source is placed at the top of the host, it can be controlled by a remote control, it can be used by an uninterrupted power source protection system, battery power is provided for no less than eight hours, the system is equipped with parameter protection at the time of power outages, it is used to import waterproof synthetic fibre material, it is produced through a precision process, and LCDs can be tilted for reading/operation, depending on the human perspective. (selection)

Metal detection function

The metal detection security screening gate must have a high-security requirement, which includes the following factors:

I’m sorry. (b) The consistency of the magnetic field, which is the key to detection;

Photo courtesy of the Ministry of Foreign Affairs. (a) The detection and search capabilities of security must be sufficient to detect any dangerous metal item, regardless of its entry location and angle;

3. Metal detection security screening gates must be sufficiently capable of detecting persons, regardless of the speed at which they pass;

This post is part of our special coverage Syria Protests 2011. There is also a need for the capability to detect iron and non-ferrous metals.

The detection area for the metal security gate.

Twelve overlapping mesh detection areas based on the basic structure of the body. Interactive launch and reception, and precise location of metal articles. Weak and blind areas in detection areas are eliminated with greater sensitivity and more stable performance. Infrared scanning of both sides, rapid capture of sensor signals, elimination of detection errors caused by delayed sensory passage in the human body, and automatic counting of the number of passing persons. The 12 main detection areas have a 1000-degree sensitivity procedure, which pre-empts the possible location and volume, weight and size of the metal articles, depending on their actual use.