Is the metal gate radioactive?

How should electronic plants be maintained when using metal security screening gates? Today, many electronic factories have purchased metal detection and security screening gates for electronic parts and components, which are essentially primarily used to protect against theft. After all, it is a practical matter that some valuable parts are valuable and not that all employees are able to comply with the law!

How, then, should electronic plants maintain such equipment while using metal security screening gates? Today, science and technology in peacekeeping are here to answer this question:

Given the length of time spent on metal detectors, which are largely open during working hours, how can this be maintained because of the greater intensity of the work done on the equipment?

1. After working late at night, attempts are made to close the security gate because it is an electronic product, with long-term powering at night and an increase in the rate of ageing, after all, when parts become older, for too long, and naturally, it reduces performance.

It’s not safe to get electricity at night! While the security controls of internal chips are enhanced by the use of a safety tube inside the security gate to prevent damage to the chips due to excessive electrical currents, high voltage is likely to burn down the main plate in the event of lightning weather, thus requiring the replacement of the chips, causing unnecessary loss and trouble.

3. Keep the perimeter of the metal gate dry and less dusty. The security equipment uses wood materials as a framework, as they do not cause metal detection interference and are of light weight and suitable for use. However, this material is not easily used for long periods of time in a damp environment and, in addition, too much dust is easily accessed through the air vents of the mainframe, rapidly ageing chips inside the mainframe and causing malfunctions.

The above three points are the attention of electronic plants in the use of security screening gates, which are properly maintained, and a device of excessive quality can be used for many years!